“We design and manufacture your process installation”

Why Skidworx?

Consultancy

Neutral, Custom consultancy

Engineering

The level of detail is determined by you!

Procurement

Meet our suppliers!

Construction

From planning until commissioning

Activities

Are you lacking the manpower to handle all of your projects at the moment? Or are you looking for flexible shell of self-employed professionals? Skidworx can help you!

Skidworx can offer project-based support to process-technical companies. Our philosophy is to split projects into separate modular systems (skids). This way, we can create more clarity in a project and this makes it much easier to outsource (a part of) your project.

We are active in all fields of EPC-management. That is why we can carry out and/or manage your project from the beginning until the end. Are you just looking for support in a specific phase of your project? We can definitely help you!

Did we catch your attention? We would be happy to discuss the possibilities.

Activities

Are you lacking the manpower to handle all of your projects at the moment? Or are you looking for a flexible shell of self-employed professionals? Skidworx can help you!

Skidworx can offer project-based support to process-technical companies. Our philosophy is to split projects into separate modular systems (skids). This way, we can create more clarity in a project and this makes it much easier to outsource (a part of) your project.

We are active in all fields of EPC-management. That is why we can carry out and manage your project from the beginning until the end. Are you just looking for support in a specific phase of your project? We can definitely help you!

Did we catch your attention? We would be happy to discuss the possibilities.

Consultancy

As a client, you are the center of our consultancy. Are you struggling with a complex engineering issue or are you looking for someone to design your installation? Then we would like to be involved  as early as possible. During our first conversations, we will look together at your wishes and needs. After that we will offer you a proper, neutral advice and an effective solution for your issue. Collaboration is the keyword this phase.

Skidworx also has a lot of knowledge in the field of ATEX, PED and other (inter)national design standards for gas related installations.

As a client, you are the center of our consultancy. Are you struggling with a complex engineering issue or are you looking for someone to design your installation? Then we would like to be involved  as early as possible. During our first conversations, we will look together at your wishes and needs. After that we will offer you a proper, neutral advice and an effective solution for your issue. Collaboration is the keyword this phase.

Skidworx also has a lot of knowledge in the field of ATEX, PED and other (inter)national design standards for gas related installations.

Engineering

Together with you as a client, we will find a solution for your engineering issues in a proactive way. We draft a “Piping & Instrumentation Diagram (P&ID) together with you. This is the starting point for our detailed design. With all relevant design standards taken into account, we help you select the proper materials, equipment and piping sizes. After that, we’ll make a 3D-model with our 3D-modeling software. This 3D-model can be translated in 2D workshop drawings to make the design ready for manufacturing.

Your wishes and needs are most important for us. That is why we implement several Go/No-go moments in our projects. The level of detail is determined by you!

Together with you as a client, we will find a solution for your engineering issues in a proactive way. We draft a “Piping & Instrumentation Diagram (P&ID) together with you. This is the starting point for our detailed design. With all relevant design standards taken into account, we help you select the proper materials, equipment and piping sizes. After that, we’ll make a 3D-model with our 3D-modeling software. This 3D-model can be translated in 2D workshop drawings to make the design ready for manufacturing.

Your wishes and needs are most important for us. That is why we implement several Go/No-go moments in our projects. The level of detail is determined by you!

Procurement

Procurement can be a time-consuming and cost-determining phase of your project. Outsourcing the procurement can be very profitable for these reasons. Together with you we will have a look at the procurement of the piping, frames and other equipment. Through the years we have built quite a few good relationships with suppliers and workshops. We would be happy to introduce them to you! Do you prefer to work with your own suppliers? We would love to meet new suppliers!

Procurement can be a time-consuming and cost-determining phase of your project. Outsourcing the procurement can be very profitable for these reasons. Together with you we will have a look at the procurement of the piping, frames and other equipment. Through the years we have built quite a few good relationships with suppliers and workshops. We would be happy to introduce them to you! Do you prefer to work with your own suppliers? We would love to meet new suppliers!

Construction

Once everything has been ordered, we are the link between you and the workshop. We keep an eye on the construction of your installation. Together with the manufacturer, we will make a project  planning. We will make sure that all  the ordered equipment will be at the right place at the right time.  We will be the link between you and the workshop.

Would you like to work with a different supplier or producer than your regular one? We would be happy to introduce some of our relationships!

At the end of the construction period, we will perform  a “Factory Acceptance Test” (FAT). We can also help you overseeing the build-up at your end-customer.

Once everything has been ordered, we are the link between you and the workshop. We keep an eye on the construction of your installation. Together with the manufacturer, we will make a project  planning. We will make sure that all  the ordered equipment will be at the right place at the right time.  We will be the link between you and the workshop.

Would you like to work with a different supplier or producer than your regular one? We would be happy to introduce some of our relationships!

At the end of the construction period, we will perform  a “Factory Acceptance Test” (FAT). We can also help you overseeing the build-up at your end-customer.

Industries 

We are committed and driven to offer support to your project in the best possible way. Together with our partners and the with the right balance between theoretical and practical experience, we can always offer an effective solution to your technical challenges. Skidworx is active in the following industries, but we wouldn’t back down from a request in a different industry.

Beer

Nowadays breweries spring up like mushrooms in a field. Skidworx has gained a lot of experience through the years when it comes to piping, equipment selection and process-technical matters. Besides the right ingredients, an accurate temperature control is a very critical factor in the art of brewing beer. Skidworx understands your wishes and needs and we are able to offer you a transparent and comprehensible plan to expand your brewing installation. In addition we offer a lot of possibilities in the field of engineering and manufacturing (insulated) piping.

Renewable gas

The renewable fuel industry is a global booming industry. Renewable gas can be made from organic substances like manure, sewage sludge or organic waste. This form is called biogas. Another form of renewable gas, is hydrogen. It can be created by splitting water with electrolysis. This is called power-to-gas (P2G) and can be called renewable as long as it is done with renewable energy. Hydrogen can be used as a fuel, but can also be reformed in to methane, better known as natural gas. Skidworx is a (process)technical specialist in the field of gasses. We use our knowledge and wide network of partners to find the right solution for your specific wishes and needs. This leads to reliable and feasible installation (or components) for buffering, transporting, purifying, dewatering and pressurizing all sorts of gasses. With our extensive knowledge of ATEX, PED and other specific design standards, we never lose sight of what matters most to us: “To ensure the quality and safety of the products we design and build.

Natural gas

The natural gas industry demands very high standards regarding reliability and certification. Environmental protection, safety and quality are critical factors in the natural gas industry. Skidworx combines a vast knowledge of gas with a lot of experience in manufacturing process installations. Our services include designing, realizing, commissioning and integrating your installation. Your requirements and preferences are the key elements in these services.

 

 

About us

We believe in a more flexible job market, not just based on capacity, but also in the activities that you are offering to clients. A company should offer a broad spectrum of activities based on what they are good at.  In our case this is EPC- / project management in the area of process installations. We can support your company in every phase of the project, whilst still being flexible.

Skidworx is a startup with its own place in industry. We consult, engineer and manage procurement and construction. We close the gap between manufacturers and companies with great innovative ideas. This way everyone can focus on what they are good at.

Danny Zwier

“Work Efficient!”

Designing a high quality product or project in an efficient way, this is what Danny always tries to achieve. Combined with his philosophy that everyone should do what they are good at, he tries to bring the right people and companies together. When this succeeds he’s a happy man.

Besides that he gets very excited about road cycling (active and passive), brewing beer, cook tasty food and travelling to far places with his girlfriend. Oh.. and don’t forget he also likes to DIY at home or at friends when something new is needed.

Rick Eilander

“Looking for adventure!”

Always looking for adventure and new challenges, that is what Rick loves to do. Kitesurfing, mountain biking and cycling is what he does in his spare time. At work he also doesn’t back down from a challenge. Rick performs best when he’s under a healthy dose of workload. He is willful, driven and a bit of a sentimentalist. A positive work environment is very important for him. That is why he’s always trying to maintain this positive vibe in the office.

He is rarely idle and you can see that in the way he works. At home he’s not often using his couch, because there is always something he can do! He loves to craft furniture and maintain his house. Just like Danny, it is important to him that everyone does what he/she is good at. That is why he doesn’t like boxed-in responsibilities.